OEM 2004 Chevrolet Venture Air Suspension Compressor

2004 Chevrolet Venture Air Suspension Compressor Parts Questions & Experts Answers

• Q: How to replace the Air Suspension Compressor on 2004 Chevrolet Venture?

  A: Vehicle elevation and support are essential before starting Air Suspension Compressor replacement. Pull the clips located on the filter's side of the Air Suspension Compressor out from the underbody rail. First remove the compressor bracket bolt then the nuts and the Air Suspension Compressor will remain suspended from its bracket hook. The first step involves disconnecting the air line from the air dryer and withdrawing the Air Suspension Compressor electrical connection. The Air Suspension Compressor requires a 90-degree rotation of itself and its bracket to separate from the vehicle brackets and enables removal of both the Air Suspension Compressor and bracket. The removal process begins by unattaching the Air Suspension Compressor dryer together with the Air Suspension Compressor relay from the Air Suspension Compressor bracket followed by Air Suspension Compressor bolt detachment before lifting off the compressor from its bracket. Disconnect the Air Suspension Compressor filter hose from the Air Suspension Compressor through two separate parts. During installation wrap the Air Suspension Compressor filter hose around the Air Suspension Compressor twice while maintaining a 50 nm (37 lb in) torque on the bracket. Put the Air Suspension Compressor on the bracket before securing its bolts/screws with 4 nm (35 lb in) torque setting. Place the Air Suspension Compressor shield on the bracket before securing its bolts to 3 nm (27lb in). Afterward attach the relay to its bracket and the Air Suspension Compressor dryer. The Air Suspension Compressor bracket requires installation onto the underbody rail before rotating it by 90 degrees to enable the compressor hook positioning. Whenever possible, connect the Air Suspension Compressor electrical connector followed by installing the air line to the air dryer. To complete the installation secure the Air Suspension Compressor bracket nuts to 10 nm (89 lb in) torque and fasten the Air Suspension Compressor bracket bolt at 50 nm (37 lb ft). Afterward, mount the Air Suspension Compressor filter to the underbody rail while dropping the vehicle to its full length.