How to Replace a Power Seat Switch on 2005 Buick Century?

In order to replace the power switch of the seat, you will be required to take off the front seat cushion outer trim panel. Then remove the screws holding the seat switch on the trim panel and disconnect the electrical connector from the power front seat switch. Following that, eject the power front seat switch from the vehicle. For installation, integrate the electrical connector to the power front seat switch while obeying the Fastener Notice in Cautions and Notices. After that, install screws to fasten the seat switch to the trim panel, tighten to 3 Nm (27 lb in). Finally, install the Front Seat cushion outer trim panel.

OEM 2005 Buick Century Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Switch found

View related parts
2005 Buick Century Seat Switch, Front Driver Side Part Number: 16805147
Product Specifications
- Other Name: Switch, Front Seat Lumbar; Power Seat Switch; Switch; Switch, Front Seat Adjuster
- Position: Front Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.9 x 7.5 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16805147
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2005 Buick Century Seat Switch

With a comprehensive array of OEM 2005 Buick Century Seat Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Century Seat Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Century Seat Switch Parts and Q&A

Q: How to Replace a Power Seat Switch on 2005 Buick Century?
A: In order to replace the power switch of the seat, you will be required to take off the front seat cushion outer trim panel. Then remove the screws holding the seat switch on the trim panel and disconnect the electrical connector from the power front seat switch. Following that, eject the power front seat switch from the vehicle. For installation, integrate the electrical connector to the power front seat switch while obeying the Fastener Notice in Cautions and Notices. After that, install screws to fasten the seat switch to the trim panel, tighten to 3 Nm (27 lb in). Finally, install the Front Seat cushion outer trim panel.