OEM 2005 Buick Century Tie Rod End

2005 Buick Century Parts Questions & Experts Answers

• Q: How to replace the Rack and Pinion Outer Tie Rod End on 2005 Buick Century?

  A: The initial step for replacing Rack And Pinion outer Tie Rod End entails supporting the raised vehicle. First remove the tire and wheel assembly before taking off the prevailing torque nut from the outer tie rod assembly and loosening the jam nut from the inner tie rod assembly. Steering linkage joint disconnection should not involve inserting a wedge between the joint and attached components because it leads to seal damage along with early failure. The universal steering linkage puller (J24319-B) can be used to detach the outer tie rod assembly from the Steering Knuckle. Move on to separate the outer tie rod assembly from its connection to the inner tie rod assembly. Instead of tightening the jam nut stage the outer tie rod assembly to the inner tie rod assembly for installation. You should install the prevailing torque nut onto the outer tie rod assembly after it is connected to the Steering Knuckle . Torque the prevailing torque nut to 30 nm (22 ft. Lbs.) while turning it 120 degrees to validate 2 1/2 - 4 1/2 threads desiring past the nylon washer. After finishing the installation you should reinstall the tire and wheel assembly then lower the vehicle for front end alignment.