How to replace the wiper motor on 2005 Buick Century?

First you must detach the air inlet grille panel then the wiper motor crank arm and wiper drive system module. Disconnect the wiper motor from the wiper drive system module by removing the screws. Set aside the wiper motor and extract the shaft seal and water shield covering it. Start by putting the water shield and shaft seal on the wiper motor before setting it onto the wiper drive system module. Install the wiper motor using its screws and tighten them to 7 N.m (62 lb in). Reinsert the wiper drive system module on top and attach the wiper motor crank arm afterward you put back the air inlet grille panel.

OEM 2005 Buick Century Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2005 Buick Century Wiper Motor
Part Number: 88958395
Product Specifications
- Other Name: Motor Kit, Windshield Wiper; Motor Assembly; Motor; Motor Kit, Windshield Wiper Motor
- Replaces: 12494761, 22144097, 12367316, 88958109
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.0 x 9.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88958395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2005 Buick Century Wiper Motor

With a comprehensive array of OEM 2005 Buick Century Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Century Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Century Parts Questions & Experts Answers

Q: How to replace the wiper motor on 2005 Buick Century?
A: First you must detach the air inlet grille panel then the wiper motor crank arm and wiper drive system module. Disconnect the wiper motor from the wiper drive system module by removing the screws. Set aside the wiper motor and extract the shaft seal and water shield covering it. Start by putting the water shield and shaft seal on the wiper motor before setting it onto the wiper drive system module. Install the wiper motor using its screws and tighten them to 7 N.m (62 lb in). Reinsert the wiper drive system module on top and attach the wiper motor crank arm afterward you put back the air inlet grille panel.

Related 2005 Buick Century Parts

Alternate Year Models

2004 Buick Century Wiper Motor