How to replace the wiper motor on 2004 Buick Century?

To change the wiper motor, start by taking off the air inlet grille panel, the wiper motor crank arm, and the wiper drives system module. Next, turn off the wiper motor screws and next remove the wiper motor from the wiper drive system module. Then take out the shaft seal and the water shield from the wiper motor. For installation, start by laying the water shield and shaft seal into the wiper motor, and position the wiper motor to wiper drive system module, be sure to follow the Fastener Notice in Service Precautions. Install wiper motor screws and clamping torque to weight 7 N.m (62 lb in). Lastly, replace the wiper drive system module wiper motor crank arm as well as the air inlet grille panel.

OEM 2004 Buick Century Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2004 Buick Century Wiper Motor Part Number: 88958395
Product Specifications
- Other Name: Motor Kit, Windshield Wiper; Motor Assembly; Motor; Motor Kit, Windshield Wiper Motor
- Replaces: 12494761, 22144097, 12367316, 88958109
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.0 x 9.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88958395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2004 Buick Century Wiper Motor

With a comprehensive array of OEM 2004 Buick Century Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Century Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick Century Wiper Motor Parts and Q&A

Q: How to replace the wiper motor on 2004 Buick Century?
A: To change the wiper motor, start by taking off the air inlet grille panel, the wiper motor crank arm, and the wiper drives system module. Next, turn off the wiper motor screws and next remove the wiper motor from the wiper drive system module. Then take out the shaft seal and the water shield from the wiper motor. For installation, start by laying the water shield and shaft seal into the wiper motor, and position the wiper motor to wiper drive system module, be sure to follow the Fastener Notice in Service Precautions. Install wiper motor screws and clamping torque to weight 7 N.m (62 lb in). Lastly, replace the wiper drive system module wiper motor crank arm as well as the air inlet grille panel.