How to replace the wiper motor on 2003 Buick Century?

Begin the motor replacement job by taking off the air inlet grille, wiper motor crank arm, and the wiper drive system module. Once you remove the wiper motor screws you can slip it out from the wiper drive system module. To replace the wiper motor you must extract its shaft seal and water shield. Put the water shield and shaft seal onto the wiper motor first before placing it on the drive system module and fasten it using wiper motor screws tightened to 7 N.m (62 lb in). Reinstall the wiper drive system module first before inserting the wiper motor crank arm and the air inlet grille panel.

OEM 2003 Buick Century Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2003 Buick Century Wiper Motor
Part Number: 88958395
Product Specifications
- Other Name: Motor Kit, Windshield Wiper; Motor Assembly; Motor; Motor Kit, Windshield Wiper Motor
- Replaces: 12494761, 22144097, 12367316, 88958109
- Item Weight: 4.10 Pounds
- Item Dimensions: 10.0 x 9.8 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88958395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2003 Buick Century Wiper Motor

With a comprehensive array of OEM 2003 Buick Century Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Century Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Century Parts Questions & Experts Answers

Q: How to replace the wiper motor on 2003 Buick Century?
A: Begin the motor replacement job by taking off the air inlet grille, wiper motor crank arm, and the wiper drive system module. Once you remove the wiper motor screws you can slip it out from the wiper drive system module. To replace the wiper motor you must extract its shaft seal and water shield. Put the water shield and shaft seal onto the wiper motor first before placing it on the drive system module and fasten it using wiper motor screws tightened to 7 N.m (62 lb in). Reinstall the wiper drive system module first before inserting the wiper motor crank arm and the air inlet grille panel.

Related 2003 Buick Century Parts

Alternate Year Models

2002 Buick Century Wiper Motor 2004 Buick Century Wiper Motor