OEM 2005 Buick LeSabre Antenna Cable

2005 Buick LeSabre Antenna Cable Parts Questions & Experts Answers

• Q: How to replace the Antenna Cable for the digital radio on 2005 Buick LeSabre?

  A: The digital radio coaxial cable replacement begins by removing the upper rear quarter trim panel then the rear assist handles before carefully lower the rear headliner section. Maintain headliner flexibility to prevent any damage. First disconnect the Antenna cables (2,3) from their clips before disassembling the Antenna Cable connection above the am/fm Antenna module before stripping away the foam tape from that connection. Before proceeding you need to disconnect the Antenna connectors from the radio Antenna and work on attaching a wire or string to the Antenna Cable's end. Unscrew the left rear compartment trim panel before disconnecting the Antenna Cable connection from the digital receiver. Extract the Antenna Cable from its clips and rear harness before you pull it into the rear compartment and then remove the wire or string from the cable while extracting the cable from your vehicle. When installing attach a wire or string to your new cable then guide the Antenna Cable carefully into the passenger compartment. Let go of the wire or string before connecting the Antenna Cable connection to the digital receiver. Secure the Antenna Cable to the hold-down clips inside the rear compartment before moving forward. The left rear compartment trim panel goes back in place while users link the Antenna connectors to the digital radio Antenna and apply foam tape around the connector. The Antenna Cable connection should be installed above the am/fm Antenna module before securing the Antenna Cable to the roof-based and third pillar locating clips. Then adjust the headliner on the roof panel before reinstalling the rear assist handles and upper rear quarter trim panel.