How to replace the MAP Sensor on VIN K applications on 2005 Buick LeSabre?

On VIN K applications, to replace the manifold absolute pressure (MAP) sensor, turn OFF the ignition and remove the fuel injector sight shield. Remove the electrical connector from the MAP sensor, and carefully bend the locking latches holding the MAP sensor onto the positive crankcase ventilation (PCV) valve cover just enough for the MAP sensor to extract straight from the PCV valve cover. Ensure that the seal on the MAP sensor is properly installed and not damaged, before the installation. Place and mount the MAP sensor at the PCV valve cover while ensuring that the locking tabs link to secure the sensor. Replace the electrical connector, and reconnect the sight shield for fuel injectors.

OEM 2005 Buick LeSabre MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2005 Buick LeSabre M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2005 Buick LeSabre MAP Sensor

With a comprehensive array of OEM 2005 Buick LeSabre MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LeSabre MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LeSabre Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on VIN K applications on 2005 Buick LeSabre?
A: On VIN K applications, to replace the manifold absolute pressure (MAP) sensor, turn OFF the ignition and remove the fuel injector sight shield. Remove the electrical connector from the MAP sensor, and carefully bend the locking latches holding the MAP sensor onto the positive crankcase ventilation (PCV) valve cover just enough for the MAP sensor to extract straight from the PCV valve cover. Ensure that the seal on the MAP sensor is properly installed and not damaged, before the installation. Place and mount the MAP sensor at the PCV valve cover while ensuring that the locking tabs link to secure the sensor. Replace the electrical connector, and reconnect the sight shield for fuel injectors.