How to replace the Camshaft Position Sensor on 2005 Buick LeSabre?

Before commencing with cmp sensor replacement you need to detach the coolant recovery reservoir along with the Drive Belt. You must disconnect the electrical connector which is attached to the Camshaft Position Sensor before taking out its retaining screw. You must remove the cmp sensor placed on the engine front cover. Assemble the cmp sensor on the engine front cover and use the retaining bolt to fasten it prior to tightening to 10 n.m (89 lb in) according to fastener notice in service precautions. You should install the Drive Belt along with the coolant recovery reservoir, reconnect the electrical connector to the Camshaft Position Sensor, then continue.

OEM 2005 Buick LeSabre Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2005 Buick LeSabre Camshaft Position Sensor
Part Number: 10456148
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2005 Buick LeSabre Camshaft Position Sensor

With a comprehensive array of OEM 2005 Buick LeSabre Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick LeSabre Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick LeSabre Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on 2005 Buick LeSabre?
A: Before commencing with cmp sensor replacement you need to detach the coolant recovery reservoir along with the Drive Belt. You must disconnect the electrical connector which is attached to the Camshaft Position Sensor before taking out its retaining screw. You must remove the cmp sensor placed on the engine front cover. Assemble the cmp sensor on the engine front cover and use the retaining bolt to fasten it prior to tightening to 10 n.m (89 lb in) according to fastener notice in service precautions. You should install the Drive Belt along with the coolant recovery reservoir, reconnect the electrical connector to the Camshaft Position Sensor, then continue.

Related 2005 Buick LeSabre Parts

Alternate Year Models

2004 Buick LeSabre Camshaft Position Sensor