How to replace the brake fluid level sensor on 2005 Buick Rendezvous?

First disconnect the electrical connector from the fluid level sensor and then remove it by using needle nose pliers to compress the switch locking tabs at the outboard side of the master cylinder. After inserting the fluid level sensor into position let the locking tabs snap together before connecting the electrical connector to the fluid level sensor .

OEM 2005 Buick Rendezvous Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2005 Buick Rendezvous Level Sensor
Part Number: 18012741
$12.95 MSRP: $25.15
You Save: $12.20 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2005 Buick Rendezvous Brake Fluid Level Sensor

With a comprehensive array of OEM 2005 Buick Rendezvous Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the brake fluid level sensor on 2005 Buick Rendezvous?
A: First disconnect the electrical connector from the fluid level sensor and then remove it by using needle nose pliers to compress the switch locking tabs at the outboard side of the master cylinder. After inserting the fluid level sensor into position let the locking tabs snap together before connecting the electrical connector to the fluid level sensor .