How to replace the brake master cylinder on 2005 Buick Rendezvous?

The Brake Master Cylinder replacement must start with removing the brake pipes and the fluid level sensor connector. Take out the master cylinder nuts, then take off the master cylinder. Take out the master cylinder reservoir after emptying all the brake fluid. Begin the installation by putting in the master cylinder reservoir and bench bleeding the master cylinder before installing it. Then, put the master cylinder into place and tighten the mounting nuts to 25 Nm (18 ft. lbs.). Connect the brake pipes and the fluid level sensor electrical connector to the master cylinder, and tighten the tube nuts to 15 Nm (11 ft. lbs.). At the end, top up the master cylinder reservoir with brake fluid and bleed the entire brake system.

OEM 2005 Buick Rendezvous Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2005 Buick Rendezvous Master Cylinder
Part Number: 18022002
Product Specifications
- Other Name: Cylinder Kit, Brake Master; Overhaul Kit; Master Cylinder Repair Kit
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18022002
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Master Cylinder
Part Number: 19209264
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18044392, 18045967, 18060786
- Item Weight: 3.40 Pounds
- Item Dimensions: 9.5 x 7.6 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209264
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2005 Buick Rendezvous Brake Master Cylinder

With a comprehensive array of OEM 2005 Buick Rendezvous Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous Brake Master Cylinder Parts Questions & Experts Answers

Q: How to replace the brake master cylinder on 2005 Buick Rendezvous?
A: The Brake Master Cylinder replacement must start with removing the brake pipes and the fluid level sensor connector. Take out the master cylinder nuts, then take off the master cylinder. Take out the master cylinder reservoir after emptying all the brake fluid. Begin the installation by putting in the master cylinder reservoir and bench bleeding the master cylinder before installing it. Then, put the master cylinder into place and tighten the mounting nuts to 25 Nm (18 ft. lbs.). Connect the brake pipes and the fluid level sensor electrical connector to the master cylinder, and tighten the tube nuts to 15 Nm (11 ft. lbs.). At the end, top up the master cylinder reservoir with brake fluid and bleed the entire brake system.