How to replace the coolant reservoir on 2005 Buick Rendezvous?

Use Hose Clamp Pliers (J 38185) to move the reservoir hose clamp at the radiator overflow fitting before removing the reservoir hose from its place. Start by removing the mounting clip that holds the reservoir in place then take out the coolant reservoir itself. Position the new coolant reservoir first then lock it down using the mounting clip. Secure the reservoir hose to the radiator overflow fitting by following steps using Hose Clamp Pliers (J 38185) in order to reposition the clamp to secure the hose. Finally, fill the coolant reservoir.

OEM 2005 Buick Rendezvous Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2005 Buick Rendezvous Reservoir
Part Number: 15250668
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
- Replaces: 10311259, 10295298
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.2 x 12.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15250668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2005 Buick Rendezvous Coolant Reservoir

With a comprehensive array of OEM 2005 Buick Rendezvous Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous Coolant Reservoir Parts Questions & Experts Answers

Q: How to replace the coolant reservoir on 2005 Buick Rendezvous?
A: Use Hose Clamp Pliers (J 38185) to move the reservoir hose clamp at the radiator overflow fitting before removing the reservoir hose from its place. Start by removing the mounting clip that holds the reservoir in place then take out the coolant reservoir itself. Position the new coolant reservoir first then lock it down using the mounting clip. Secure the reservoir hose to the radiator overflow fitting by following steps using Hose Clamp Pliers (J 38185) in order to reposition the clamp to secure the hose. Finally, fill the coolant reservoir.