How to replace the coolant reservoir on 2006 Buick Rendezvous?

Begin by removing the hose clamp on the radiator overflow fitting with the (J38185 Hose Clamp Pliers) and then reinstalling it in its proper place. Then, disconnect the reservoir hose from the radiator overflow fitting, pry out the mounting clip and take out the coolant reservoir. To install, start by putting the coolant reservoir and the mounting clip back in place and attach the reservoir hose to the radiator overflow fitting. Seat the hose into place by sliding the hose clamp back onto the hose then fill the coolant reservoir.

OEM 2006 Buick Rendezvous Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2006 Buick Rendezvous Reservoir
Part Number: 15250668
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
- Replaces: 10311259, 10295298
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.2 x 12.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15250668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2006 Buick Rendezvous Coolant Reservoir

With a comprehensive array of OEM 2006 Buick Rendezvous Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Rendezvous Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Rendezvous Coolant Reservoir Parts Questions & Experts Answers

Q: How to replace the coolant reservoir on 2006 Buick Rendezvous?
A: Begin by removing the hose clamp on the radiator overflow fitting with the (J38185 Hose Clamp Pliers) and then reinstalling it in its proper place. Then, disconnect the reservoir hose from the radiator overflow fitting, pry out the mounting clip and take out the coolant reservoir. To install, start by putting the coolant reservoir and the mounting clip back in place and attach the reservoir hose to the radiator overflow fitting. Seat the hose into place by sliding the hose clamp back onto the hose then fill the coolant reservoir.