How to replace the coolant reservoir on 2007 Buick Rendezvous?

The first step to replacing the coolant recovery reservoir is to use the Hose Clamp Pliers (J 38185) to reposition the clamp at its fitting, then pull out and remove the reservoir hose. Once the hose is removed, unclip the coolant reservoir and take it out. Place the new coolant reservoir in the right spot and then attach the mounting clip to it. Re-attach the reservoir hose to the radiator overflow fitting and tighten the hose with the Hose Clamp Pliers (J 38185). After everything is done, fill up the coolant reservoir if it is needed.

OEM 2007 Buick Rendezvous Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2007 Buick Rendezvous Reservoir
Part Number: 15250668
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
- Replaces: 10311259, 10295298
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.2 x 12.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15250668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2007 Buick Rendezvous Coolant Reservoir

With a comprehensive array of OEM 2007 Buick Rendezvous Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rendezvous Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rendezvous Coolant Reservoir Parts Questions & Experts Answers

Q: How to replace the coolant reservoir on 2007 Buick Rendezvous?
A: The first step to replacing the coolant recovery reservoir is to use the Hose Clamp Pliers (J 38185) to reposition the clamp at its fitting, then pull out and remove the reservoir hose. Once the hose is removed, unclip the coolant reservoir and take it out. Place the new coolant reservoir in the right spot and then attach the mounting clip to it. Re-attach the reservoir hose to the radiator overflow fitting and tighten the hose with the Hose Clamp Pliers (J 38185). After everything is done, fill up the coolant reservoir if it is needed.