OEM 2005 Buick Rendezvous Tail Light

2005 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the rear tail light assembly or back up, sidemarker, stop, and turn signal bulbs on 2005 Buick Rendezvous?

  A: Starting the tail lamp assembly and back up and sidemarker stop and turn signal bulb replacement requires you to open the liftgate then remove tail lamp screws. Loosen the tail lamp through its rearward movement so it can leave its rear body panel retainers. Next disconnect the tail lamp wiring harness electrical connector. The locking tab on each socket requires pressure before you can turn counterclockwise for removal. Replace all bulbs before reinstalling. To install the bulbs users must first put them into the tail lamp and side marker lamp sockets before attaching them to the tail lamp through clockwise rotation until reaching full locking tab position. Insert the tail lamp electrical connector into the wiring harness then position the tail lamp retainer slots with the body panel tabs before pressing the lamp to complete its seating. Finish the service by securing the tail lamp through screw installation and torquing them to 2 N.m (18 lb in), then close the liftgate.