How to replace the Tail Light assembly and bulbs on Buick Rendezvous?

To replace the tail lamp assembly or back up, sidemarker, stop, and turn signal bulb on the rendezvous, start with the opening of the liftgate and the removal of screws in the tail lamp. Slide the tail lamp rearward to clear it from the retainers on the rear body panel, then pull the tail lamp electrical connector from the tail lamp wiring harness. Remove the tail lamp and side marker lamp sockets by depressed the locking tab and turning counter clockwise, and remove the bulbs when they are changed. During installation, replace the new bulbs into the tail lamp and side marker lumps sockets and then fix the sockets into the tail lamp by turning till the locking tab is penetrated completely. Reconnect tail lamp to the wiring harness, line up the retainer slots with the tabs on the rear body panel and press tail lamp into place until it cannot be pushed any further. Attach this tail lamp to the body using screws which should be tightened up to 2 n.m (18 lb in) to the body lastly, closing the liftgate.

OEM Buick Rendezvous Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Tail Lights found

View related parts
Buick Rendezvous Tail Lamp Assembly, Passenger Side
Part Number: 10320221
$51.26 MSRP: $196.89
You Save: $145.63 (74%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp, Tail Lamp; Back Up Light; Tail Light
- Position: Passenger Side
- Replaces: 10423590
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
Buick Rendezvous Tail Lamp Assembly, Passenger Side
Part Number: 15281032
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 10352231
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Tail Lamp Assembly, Driver Side
Part Number: 10352230
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 10342803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Tail Lamp Assembly, Driver Side
Part Number: 10320220
$30.41 MSRP: $45.26
You Save: $14.85 (33%)
Product Specifications
- Other Name: Lamp, Tail Lamp; Back Up Light; Tail Light
- Position: Driver Side
- Replaces: 10423589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS

Buick Rendezvous Tail Light

Our website offers an extensive catalog of genuine Buick Rendezvous Tail Light at unbeatable prices. Every OEM Buick Rendezvous Tail Light comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Rendezvous Tail Light Parts Questions & Experts Answers

Tail Lamp Assembly, Driver Side
10320220
Q: How to replace the Tail Light assembly and bulbs on Buick Rendezvous?
A: To replace the tail lamp assembly or back up, sidemarker, stop, and turn signal bulb on the rendezvous, start with the opening of the liftgate and the removal of screws in the tail lamp. Slide the tail lamp rearward to clear it from the retainers on the rear body panel, then pull the tail lamp electrical connector from the tail lamp wiring harness. Remove the tail lamp and side marker lamp sockets by depressed the locking tab and turning counter clockwise, and remove the bulbs when they are changed. During installation, replace the new bulbs into the tail lamp and side marker lumps sockets and then fix the sockets into the tail lamp by turning till the locking tab is penetrated completely. Reconnect tail lamp to the wiring harness, line up the retainer slots with the tabs on the rear body panel and press tail lamp into place until it cannot be pushed any further. Attach this tail lamp to the body using screws which should be tightened up to 2 n.m (18 lb in) to the body lastly, closing the liftgate.