OEM 2005 Buick Rendezvous Tailgate Latch

2005 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the tailgate latch on 2005 Buick Rendezvous?

  A: Start by opening both the liftgate and endgate after which remove the endgate trim panel and water deflector. To begin the endgate latch replacement follow this order: Detach the endgate latch rod from the bellcrank after removing the endgate latch bolts while pulling the endgate latch forward until the endgate latch rod detaches from the endgate. Disconnect electrical connectors from the endgate latch before proceeding to remove the complete latch from your vehicle. The child safety switch on the endgate latch must be turned off before installation to prevent damage from occurring. Connect the electrical connectors first to the end gate and then link the endgate latch rod to the latch. Use the endgate latch to enter the end gate then bolt the endgate latch in place while securing it with 10 N.m (89 lb in) torque. Install the endgate latch rod on the bellcrank after replacing both the water deflector and endgate trim panel. To finish close the endgate after securing the liftgate.