Make sure this part fits

GM 10347142
Lock

2002-2007 Buick Rendezvous

Customer Questions & Expert Answers (10)
GM 10347142 Lock
  • Part Description
    Lock, End Gate Lock; Door Lock
  • Replaces
    10439271
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10347142 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10347142 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the tailgate latch on the end gate on Buick Rendezvous? Posted by Customer
    A:
    Begin tailgate latch replacement on the end gate by opening both liftgate and endgate. Start by removing both the endgate trim panel and water deflector. Start by detaching the endgate latch rod from the bellcrank and afterward remove the endgate latch bolts from the endgate latch. To remove the endgate latch from the vehicle you must push the endgate latch forward and detach its rod from the endgate then disconnect all endgate latch electrical connections before taking out the latch. Connect the electrical connectors while setting the endgate latch into position on the end gate. After connecting the endgate latch rod to the endgate latch feed the latch through the end gate aperture. First secure endgate latch bolts by torquing them to 10 N.m (89 lb in) before attaching the endgate latch rod to the bellcrank. Cheat ending starts by placing back the water deflector along with the endgate trim panel. Then close both the liftgate and endgate afterward.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the tailgate latch on Buick Rendezvous? Posted by Customer
    A:
    Following these steps you can replace the tailgate latch: Start by opening the liftgate and endgate before taking off the endgate trim panel and water deflector. Begin by disconnecting the endgate latch rod from the bellcrank and then remove endgate latch bolts before moving the endgate latch forward to disconnect the endgate latch rod from its position on the endgate. The technician needs to disconnect endgate latch electrical connectors before removing it from the vehicle. The installation process begins by lining up the endgate latch onto the end gate then coupling electrical connectors before securing the endgate latch rod to its location on the end gate. Place the endgate latch into the end gate opening and secure the endgate latch bolts at 10 N.m torque (89 lb in). Reinstall the endgate latch rod to the bellcrank followed by the water deflector and endgate trim panel installation. End the procedure by closing both doors while keeping the endgate latch child safety switch disengaged to prevent problems.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be ensured during installation to avoid damage for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Ensure the child safety switch on the endgate latch is not engaged.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the next step after removing the screws for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Detach the rear door actuator from the rear door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after installing the new latch for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Reconnect the electrical connector to the liftgate latch and reinstall the liftgate trim panel before closing the liftgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    What is the final step in the process for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the rear door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step in the installation process for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Align the endgate latch to the end gate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What is the next step after removing the screws for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Detach the front door actuator from the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the final step in the process for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock 10347142 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10347142 Lock is available in the market under the name GM Door Lock, Door Lock Actuator, Tailgate Latch, Tailgate Lock, Trunk Latch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10347142 Lock fits certain Buick Rendezvous models.
The original GM component designated by manufacturer part number 10347142 maintains top performance when functioning as the Lock, End Gate Lock; Door Lock unit. The component 10347142 is constructed from durable material and its dimensions span 6.3 x 3.2 x 3.1 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lock, Rear Compartment Lid Or Tail Gate Latch. The part 10347142 has available replacement options 10439271. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.