ChevyParts
My Garage
My Account
Cart
OEM 2005 Buick Terraza Emblem
Badge- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Emblems found
Product Specifications- Other Name: Emblem, Rear End Panel And Tailgate; Emblem, End Gate And Rear Door Decoration
- Position: Rear
- Replaces: 15102870
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15259668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Buick Terraza Emblem
Part Number: 15123548$6.30 MSRP: $34.32You Save: $28.02 (82%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Emblem, Door Sill And Rocker
- Position: Front
- Item Weight: 0.90 Pounds
- Item Dimensions: 25.7 x 9.8 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15123548
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.7 x 5.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10339164
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Buick Terraza Emblem
With a comprehensive array of OEM 2005 Buick Terraza Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Terraza Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Buick Terraza Emblem Parts Questions & Experts Answers
- Q: How to replace or repair an emblem/nameplate on 2005 Buick Terraza?A: Before installing new emblems/nameplates put tape on the body panel and use alignment tape during the process. Apply the Heat Gun (J 25070) in circular movements 152 mm (6 inches) away from the surface for 30 seconds to heat the emblem/nameplate. Use a plastic flat tool to gently take the emblem/nameplate off. A small disc (3M TM Scotch Brite P/N 07501) will remove adhesive from body panels while a Varnish Makers and Painters solution or a 50/50 water and isopropyl alcohol mixture removes adhesive from plastic panels using a lint-free cloth. Wipe the installation space with the same solution while letting it air-dry completely. Mark the spot using tape when the emblem/nameplate location is unknown. Place the TERRAZA emblem 1.3 inches to the left at the liftgate's outer edge yet 8.23 inches from its bottom edge to the bottom of the emblem. Place the CXL emblem 1.30-inch to the right and 8.23-inch below the liftgate bottom edge. The VERSATRAK emblem should be fixed 37 mm right and 53 mm down from the bottom edge. Place the Buick emblem at the center of the license plate pocket space. Apply the Heat Gun (J 25070) to make the mounting surface 80-105°F. Set the emblem/nameplate temperature range to 85-90°F. Pull off the protective tape from the adhesive backing. Then set the emblem/nameplate at pre-printed marks before pressing it hard onto the correct surface. Take off the covering shield from the body area.
Related 2005 Buick Terraza Parts
2005 Buick Terraza Door Handle
2005 Buick Terraza Bumper
2005 Buick Terraza Cup Holder
2005 Buick Terraza Door Hinge
2005 Buick Terraza Door Seal
2005 Buick Terraza Door Striker
2005 Buick Terraza Tailgate Handle
2005 Buick Terraza Washer Pump
2005 Buick Terraza Weather Strip
2005 Buick Terraza Window Motor
2005 Buick Terraza Window Regulator
2005 Buick Terraza Wiper Motor