How to replace the underhood fuse box on 2005 Cadillac STS?

The replacement procedure for underhood electrical center or junction block begins by disconnecting the negative Battery Cable. First separate the electrical cover of the center and its negative cable fastener. First disconnect the electrical connector then remove the fasteners which secure the electrical center board. Unlock all electrical center board tabs before lifting the board upward until you can pull the harness at locking tabs for removal. The electrical center must be detached from the vehicle through the removal of fasteners (1) and (2). Follow these steps to support the electrical center onto the vehicle frame using fasteners (1, 2) which need to be tightened to 10 n.m (86 lb in). Secure the electrical center board with fasteners while tightening them to 7 n.m (62 lb in). At the same time install the harness at its locking tabs. The fastener of the negative cable needs reinstallation onto the electrical center using a torque of 15 n.m (11 lb ft) before installing the electrical center cover and Battery Cable restoration.

OEM 2005 Cadillac STS Fuse Box

Fuse Holder Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuse Boxes found

View related parts
2005 Cadillac STS Relay & Fuse Plate
Part Number: 15867860
Product Specifications
- Other Name: Block, Wiring Junction; Fuse Box; Block, Main Wiring Junction And Fuse Block
- Replaces: 15867859, 25774213
- Item Weight: 4.90 Pounds
- Item Dimensions: 14.5 x 10.7 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15867860
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac STS Submodels:
- Base, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac STS Relay & Fuse Plate
Part Number: 89046747
Product Specifications
- Other Name: Block Assembly, Body Wiring Harness Junction; Fuse Box; Block, Main Wiring Junction And Fuse Block; Block, Body Wiring
- Item Weight: 1.00 Pounds
- Item Dimensions: 17.1 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89046747
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac STS Relay & Fuse Plate
Part Number: 89046748
Product Specifications
- Other Name: Block Assembly, Body Wiring Harness Junction; Fuse Box; Block, Main Wiring Junction And Fuse Block; Block, Body Wiring
- Item Weight: 1.00 Pounds
- Item Dimensions: 17.6 x 4.6 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89046748
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2005 Cadillac STS Fuse Box

With a comprehensive array of OEM 2005 Cadillac STS Fuse Box, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac STS Fuse Box are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the underhood fuse box on 2005 Cadillac STS?
A: The replacement procedure for underhood electrical center or junction block begins by disconnecting the negative Battery Cable. First separate the electrical cover of the center and its negative cable fastener. First disconnect the electrical connector then remove the fasteners which secure the electrical center board. Unlock all electrical center board tabs before lifting the board upward until you can pull the harness at locking tabs for removal. The electrical center must be detached from the vehicle through the removal of fasteners (1) and (2). Follow these steps to support the electrical center onto the vehicle frame using fasteners (1, 2) which need to be tightened to 10 n.m (86 lb in). Secure the electrical center board with fasteners while tightening them to 7 n.m (62 lb in). At the same time install the harness at its locking tabs. The fastener of the negative cable needs reinstallation onto the electrical center using a torque of 15 n.m (11 lb ft) before installing the electrical center cover and Battery Cable restoration.