How to replace the engine oil pressure switch on 2005 Cadillac STS?

Engine Oil Pressure Sensor or Switch replacement starts with oil filter adapter removal and ends with sensor or switch extraction from the adapter. Before installation of a new O-ring on the oil pressure switch you should inspect and clean the oil filter adapter. The correct installation of the oil pressure switch requires tightener compliance with Component Fastener Tightening Notice in Service Precautions to secure 16 Nm (12 ft. lbs.) torque. You must reinstall the oil filter adapter as the next step.

OEM 2005 Cadillac STS Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2005 Cadillac STS Pressure Switch
Part Number: 12674782
$32.62 MSRP: $63.87
You Save: $31.25 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Oil Pressure; Pressure Sensor/Switch; Pressure Sensor; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12621649, 12621659, 12570798
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12674782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac STS Submodels:
- Base | 6 Cyl 3.6 L GAS

2005 Cadillac STS Oil Pressure Switch

With a comprehensive array of OEM 2005 Cadillac STS Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac STS Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the engine oil pressure switch on 2005 Cadillac STS?
A: Engine Oil Pressure Sensor or Switch replacement starts with oil filter adapter removal and ends with sensor or switch extraction from the adapter. Before installation of a new O-ring on the oil pressure switch you should inspect and clean the oil filter adapter. The correct installation of the oil pressure switch requires tightener compliance with Component Fastener Tightening Notice in Service Precautions to secure 16 Nm (12 ft. lbs.) torque. You must reinstall the oil filter adapter as the next step.