How to replace the Electronic Suspension Control Module on 2005 Cadillac STS?

To make the Electronic Suspension Control Module with an accommodation, you have to remove the right rear trim panel. Next, loosen the electronic suspension control (ESC) module nuts and remove the unplug ESC module electrical connector. Then, take out the ESC module. To perform installation, start with installation of the ESC module and follow this up with connection of ESC module electrical connector. Make sure to tighten the ESC module nuts to 9 Nm (80 inch lbs.) and at last, reinstall the right rear trim panel.

OEM 2005 Cadillac STS Suspension Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Suspension Control Module found

View related parts
2005 Cadillac STS Control Module
Part Number: 15816809
Product Specifications
- Other Name: Module Assembly-Electronic Suspension Control; Suspension Control Module; Module, Electronic Control Suspension
- Replaces: 25735852
- Item Weight: 1.60 Pounds
- Item Dimensions: 10.2 x 6.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15816809
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac STS Submodels:
- Base, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2005 Cadillac STS Suspension Control Module

With a comprehensive array of OEM 2005 Cadillac STS Suspension Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac STS Suspension Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the Electronic Suspension Control Module on 2005 Cadillac STS?
A: To make the Electronic Suspension Control Module with an accommodation, you have to remove the right rear trim panel. Next, loosen the electronic suspension control (ESC) module nuts and remove the unplug ESC module electrical connector. Then, take out the ESC module. To perform installation, start with installation of the ESC module and follow this up with connection of ESC module electrical connector. Make sure to tighten the ESC module nuts to 9 Nm (80 inch lbs.) and at last, reinstall the right rear trim panel.