Make sure this part fits

GM 12674782
Pressure Switch

2004-2018 GM

Customer Questions & Expert Answers (29)
GM 12674782 Pressure Switch
GM 12674782 Pressure Switch
  • Part Description
    Sensor Assembly-Engine Oil Pressure; Pressure Sensor/Switch
  • Replaces
    12621649, 12621659, 12570798
  • Manufacturer
    General Motors
Make sure this part fits
$33.56 MSRP: $57.14
You Save: $23.58 (42%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    2004-2005 Buick RendezvousCXL, CXL Plus, Ultra6 Cyl 3.6 L GAS
    2006-2007 Buick TerrazaCX, CXL6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2013-2018 Cadillac ATSLuxury, Performance, Premium, Premium Luxury, Premium Performance, V6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2004-2015 Cadillac CTSBase, Luxury, Performance, Premium, V6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    2004-2011 Cadillac SRXBase, Performance, Premium6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
    2005-2011 Cadillac STSBase6 Cyl 3.6 L GAS
    2010-2015 Chevrolet CamaroLS, LT, SS6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
    2012-2017 Chevrolet CapricePPV6 Cyl 3.6 L FLEX
    2015-2016 Chevrolet ColoradoLT, WT, Z716 Cyl 3.6 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12674782 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12674782 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the engine oil pressure switch on Buick LaCrosse? Posted by Customer
    A:
    You should begin the Engine Oil Pressure Sensor or Switch replacement process by turning off the ignition and severing the oil pressure sensor electrical connection. Detach the oil pressure sensor from its position next. Before installing the oil pressure sensor you should read the Fastener Notice in Service Precautions and perform the installation while tightening the sensor to 20 Nm (15 ft. lbs.). Connect the oil pressure sensor electrical connector as the last step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Oil Pressure Switch on Cadillac SRX? Posted by Customer
    A:
    First, turn the ignition OFF and disconnect the oil pressure sensor electrical connector to replace the Engine Oil Pressure Sensor or Switch. Then, take off the oil pressure sensor. For installation, install the oil pressure sensor and tighten it to 20 Nm (15 ft. lbs.) remembering the Fastener Notice in Service Precautions. Finally, connect oil pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the engine oil pressure switch on Chevrolet Uplander? Posted by Customer
    A:
    Users should start their replacement task by disconnecting the negative Battery Cable. Lift the vehicle before you remove the radiator air baffle. Start by disconnecting the engine harness electrical connector from the engine oil pressure sensor followed by sensor removal. A proper replacement requires new engine oil pressure sensor installation at 16 n.m (12 lb ft) torque followed by cable connection of the engine harness electrical connector. Before finishing the job lower the vehicle using supports and reconnect the negative cable.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after installing the oil pressure sensor for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Connect the oil pressure sensor electrical connector and reinstall the lower air baffle and deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    How do you install the new oil pressure sensor for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Install the oil pressure sensor and tighten it to 20 N.m (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the final step after reconnecting the electrical connector for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Lower the vehicle and reconnect the battery negative cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the torque specification for tightening the engine oil pressure switch for the 2006 Buick Terraza? Posted by Customer
    A:
    Tighten it to 16 Nm (12 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the first step to replace the engine oil pressure sensor or switch for the 2004 Cadillac CTS? Posted by Customer
    A:
    First, disconnect the electrical connector from the engine oil pressure switch and remove the switch from the oil pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the final step after installing the oil pressure sensor for the 2008 Cadillac CTS? Posted by Customer
    A:
    Connect the oil pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the first step to replace the Engine Oil Pressure Sensor or Switch for the 2005 Cadillac CTS? Posted by Customer
    A:
    Turn the ignition OFF and disconnect the oil pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the final step after installing the oil pressure sensor for the 2010 Cadillac CTS? Posted by Customer
    A:
    Reconnect the oil pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What should be done after removing the oil filter adapter for the 2007 Cadillac SRX? Posted by Customer
    A:
    Take out the oil pressure sensor or switch from the oil filter adapter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the final step in the process for the 2007 Buick Terraza? Posted by Customer
    A:
    Reconnect the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the final step after installing the oil pressure sensor for the 2004 Cadillac SRX? Posted by Customer
    A:
    Connect the oil pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the first step to replace the Engine Oil Pressure Sensor or Switch for the 2007 Cadillac STS? Posted by Customer
    A:
    Turn the ignition OFF and remove the front compartment sight shield as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the required torque for tightening the oil pressure switch to the oil filter adapter for the 2005 Cadillac STS? Posted by Customer
    A:
    It should be tightened to 16 Nm (12 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What should be followed when installing the oil pressure switch for the 2006 Cadillac STS? Posted by Customer
    A:
    Ensure to follow the Component Fastener Tightening Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the next step after disconnecting the electrical connector for the 2009 Cadillac SRX? Posted by Customer
    A:
    Remove the oil pressure sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What should be done after installing the engine oil pressure sensor for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Connect the engine oil pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the torque specification for tightening the oil pressure sensor during installation for the 2009 Cadillac STS? Posted by Customer
    A:
    Ensure to tighten the oil pressure sensor to 20 Nm (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    How should the oil pressure sensor be installed for the 2010 Cadillac STS? Posted by Customer
    A:
    Install the oil pressure sensor and tighten it to 20 Nm (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What should be done after installing the oil pressure sensor for the 2008 Cadillac STS? Posted by Customer
    A:
    Connect the oil pressure sensor electrical connector and reinstall the front compartment sight shield as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What tool is needed to remove the oil pressure sensor for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Use the Oil Pressure Sensor Socket (J41712).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What should be ensured during installation for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Follow the fastener notice in service precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the final step after replacing the engine oil pressure switch for the 2009 Chevrolet Malibu? Posted by Customer
    A:
    Finally, reinstall the starter following the same procedures used for removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the first step to replace the engine oil pressure sensor or switch for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the installation procedure for the oil pressure sensor for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Ensure to install the oil pressure sensor and tighten it to 22 N.m (16 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    Q:
    What is the final step after installing the oil pressure sensor for the 2007 Cadillac CTS? Posted by Customer
    A:
    Connect the oil pressure sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Pressure Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pressure Switch 12674782 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12674782 Pressure Switch is available in the market under the name GM Oil Pressure Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12674782 Pressure Switch fits certain Chevrolet Colorado, Malibu, Camaro models, as well as GMC Canyon. Additionally, it is compatible with Cadillac CTS, ATS, SRX and Buick LaCrosse, Rendezvous, Terraza models.
The original GM component designated by manufacturer part number 12674782 maintains top performance when functioning as the Sensor Assembly-Engine Oil Pressure; Pressure Sensor/Switch unit. The component 12674782 is constructed from durable material and its dimensions span 3.1 x 2.1 x 2.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Sensor; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature. The part 12674782 has available replacement options 12621649, 12621659, 12570798. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.