How to replace the coolant reservoir on 2005 Chevrolet Blazer?

To change coolant recovery reservoir, one must, then, remove the PCM without disconnecting the wiring harness. Use Hose Clamp Pliers (J 38185) to reposition the hose clamps, and then pull the hose away from the coolant recovery reserve. Next, extract the retaining nuts from the reservoir and remove the latter itself, draining all the coolant. For installation, the new coolant recovery reservoir must be installed with the retaining nuts torqued 8 - 11 Nm (6 - 8 ft. lbs.) while meticulously aligning themselves with the Fastener Notice in Service Precautions. Attach the hose to the reservoir, relocate the hose clamp with Hose Clamp Pliers (J 38185), and reinstall the PCM. Finally, top up with coolant in the reservoir.

OEM 2005 Chevrolet Blazer Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2005 Chevrolet Blazer Recovery Tank Part Number: 15075570
Product Specifications
- Other Name: Reservoir, Coolant Recovery; Coolant Reservoir; Reservoir Assembly; Reservoir, Engine Coolant Recovery
- Replaces: 15990479
- Item Weight: 3.00 Pounds
- Item Dimensions: 16.1 x 12.4 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15075570
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS

2005 Chevrolet Blazer Coolant Reservoir

With a comprehensive array of OEM 2005 Chevrolet Blazer Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Blazer Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Blazer Coolant Reservoir Parts and Q&A

Q: How to replace the coolant reservoir on 2005 Chevrolet Blazer?
A: To change coolant recovery reservoir, one must, then, remove the PCM without disconnecting the wiring harness. Use Hose Clamp Pliers (J 38185) to reposition the hose clamps, and then pull the hose away from the coolant recovery reserve. Next, extract the retaining nuts from the reservoir and remove the latter itself, draining all the coolant. For installation, the new coolant recovery reservoir must be installed with the retaining nuts torqued 8 - 11 Nm (6 - 8 ft. lbs.) while meticulously aligning themselves with the Fastener Notice in Service Precautions. Attach the hose to the reservoir, relocate the hose clamp with Hose Clamp Pliers (J 38185), and reinstall the PCM. Finally, top up with coolant in the reservoir.