How to replace the hazard and turn signal flasher on 2005 Chevrolet Cavalier?

Start replacement by disconnecting the electronic connector from the flasher module and then pulling the module through the brake pedal bracket. Detach the flasher module if needed but leave it inside the vehicle. To install the new flasher you need to join the electrical connector to the flasher module first then put the flasher module back onto the brake pedal bracket. Press the flasher module to fasten the rosebud retainer to the brake pedal bracket .

OEM 2005 Chevrolet Cavalier Turn Signal Flasher

Turn Signal Indicator Flasher

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Flasher found

View related parts
2005 Chevrolet Cavalier Flasher Relay Part Number: 12450070
Product Specifications
- Other Name: Flasher, Hazard Lamp & Turn Signal Lamp; Turn Signal Flasher; Hazard Flasher; Flasher, Chassis/Body Marker/Hazard; Flasher, Turn Signal Lamp; Flasher
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 2.4 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450070
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2005 Chevrolet Cavalier Turn Signal Flasher

With a comprehensive array of OEM 2005 Chevrolet Cavalier Turn Signal Flasher, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Cavalier Turn Signal Flasher are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Cavalier Turn Signal Flasher Parts and Q&A

Q: How to replace the hazard and turn signal flasher on 2005 Chevrolet Cavalier?
A: Start replacement by disconnecting the electronic connector from the flasher module and then pulling the module through the brake pedal bracket. Detach the flasher module if needed but leave it inside the vehicle. To install the new flasher you need to join the electrical connector to the flasher module first then put the flasher module back onto the brake pedal bracket. Press the flasher module to fasten the rosebud retainer to the brake pedal bracket .