How to replace the rear door striker on 2005 Chevrolet Equinox?

To change the striker of the rear door, make sure the ignition is off, and the key is out. Circle the striker and leave it as a reference, and loosen the screws and the striker. Install the new striker loosely, fit it into the marks, and tighten the bolts and it may require adjustment to get the door to close properly.

OEM 2005 Chevrolet Equinox Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Striker found

View related parts
2005 Chevrolet Equinox Striker, Front Part Number: 20801140
$9.41 MSRP: $14.00
You Save: $4.59 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Front Side Door Lock; Striker, Rear Compartment Lid Lock Or Liftgate; Striker, Door Lock Striker
- Position: Front
- Replaces: 12451555, 22723518
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20801140
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

2005 Chevrolet Equinox Door Striker

With a comprehensive array of OEM 2005 Chevrolet Equinox Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Equinox Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Equinox Door Striker Parts and Q&A

Q: How to replace the rear door striker on 2005 Chevrolet Equinox?
A: To change the striker of the rear door, make sure the ignition is off, and the key is out. Circle the striker and leave it as a reference, and loosen the screws and the striker. Install the new striker loosely, fit it into the marks, and tighten the bolts and it may require adjustment to get the door to close properly.