OEM 2005 Chevrolet Equinox Window Regulator

2005 Chevrolet Equinox Window Regulator Parts Questions & Experts Answers

• Q: How to replace the rear door window regulator on 2005 Chevrolet Equinox?

  A: The replacement of the rear door Window Regulator requires beginning with removing the rear door outside handle. After removing the rear door outside handle you should remove both the rear door window run channel assembly and the rear door lower speaker. Professionalism begins with disconnecting the electrical connector rosebuds then it proceeds with bolting removal from the rear module followed by unfastening the remaining 4 bolts from the module. Detach the door harness at the door jamb following removal of the 3 latch bolts attached to the door shut face. Take out the Window Regulator module after freeing it from the door. To install the Window Regulator module position it inside the door while connecting the door harness at the door jamb. Screw in the 3 latch bolts to the door shut face at 10 n.m (89 lb in) before adding and torquing the 4 module bolts to 8 n.m (71 lb in). Proceed by reconnecting the electrical connector rosebuds before you put in the rear door lower speaker. The last step involves adding the rear door outside handle and rear door window run channel assembly.