OEM 2006 Chevrolet Equinox Window Regulator

2006 Chevrolet Equinox Window Regulator Parts Questions & Experts Answers

• Q: How to replace the rear door window regulator on 2006 Chevrolet Equinox?

  A: The first task for replacing the rear door Window Regulator begins with removing the rear door outside handle. Reserve work on the rear door window run channel assembly while performing the removal of the rear door lower speaker. The process begins with removing the electrical connector rosebuds followed by loosening the 2 rear module bolts and finally removing all the 4 remaining module bolts. After disconnecting the door harness at the door jamb, remove the 3 latch bolts which are installed on the door shut face. Move on to completely taking out the Window Regulator module which is attached to the door. When installing fit the Window Regulator into the door then reconnect all door harness connections at the door jamb. Install three latch bolts on the door shut face while tightening them to 10 n.m (89 lb in) then add four module bolts that require 8 n.m (71 lb in) tightening torque. The rear door lower speaker must be reinstalled after reconnecting the electrical connector rosebuds to the hardware. End your work by fastening the rear door window run channel assembly together with the rear door outside handle.