How to replace the front interior door handle on 2005 Chevrolet Equinox?

You will start replacing a front door interior handle by taking out the screw located at the center of the pocket on the inside handle. You should slide the handle forward to reveal the lock rods before pulling it outward. Remove the rods from their retaining clips through the use of a thin-bladed tool. The power window installation requires you to disconnect the electrical connector from the switch by pressing on the retaining tabs. The installation requires you to connect the electrical connector to the Power Window Switch followed by fitting the inside handle into the door trim and narrowly seating the rear tangs. Use your hand to lift the lock rods into position in the retaining clips before attaching the clips on top of the rods. Press the handle into position while moving it towards the rear side of the trim panel to let tangs engage properly while rods remain above the water deflector. Insert the screw into the handle before tightening it to 2.5 n.m (22 lb in). The correct installation of lock rods can be verified by checking for proper movement of the lock button combined with a smooth operation of the inside handle.

OEM 2005 Chevrolet Equinox Door Handle

Inside Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Door Handles found

View related parts
2005 Chevrolet Equinox Handle, Inside, Passenger Side
Part Number: 15926296
$71.98 MSRP: $107.14
You Save: $35.16 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Door Lock Inside Handle; Interior Door Handle
- Position: Passenger Side
- Replaces: 05488640, 15831877, 5488640
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.2 x 5.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15926296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Equinox Handle, Inside, Driver Side
Part Number: 15926295
$38.20 MSRP: $55.13
You Save: $16.93 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle Assembly-Front Side Door Inside Satin Finish Sna; Interior Door Handle; Handle, Door Lock Inside Handle
- Position: Driver Side
- Replaces: 15831878
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.2 x 5.1 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15926295
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Equinox Handle, Outside, Black
Part Number: 22672194
$30.89 MSRP: $48.34
You Save: $17.45 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Door Outside Handle; Exterior Door Handle; Lever, Door Outside Handle
- Position: Front and Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 3.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22672194
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Equinox Submodels:
- LS, LT, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Chevrolet Equinox Handle
Part Number: 5485520
Product Specifications
- Other Name: Handle-Lift Gate Outside; Handle, Rear Compartment Lid Or Tail Gate Latch
- Item Weight: 1.20 Pounds
- Item Dimensions: 5.1 x 5.1 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5485520
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Equinox Submodels:
- LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Chevrolet Equinox Handle, Outside
Part Number: 5480876
Product Specifications
- Other Name: Handle Assembly-Lift Gate Outside; Tailgate Handle; Handle, Rear Compartment Lid Or Tail Gate Latch
- Item Weight: 0.90 Pounds
- Item Dimensions: 18.9 x 5.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5480876
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS
View related parts
2005 Chevrolet Equinox Handle, Outside, Black
Part Number: 22729814
Product Specifications
- Other Name: Lever, Door Outside Handle; Exterior Door Handle
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.3 x 3.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22729814
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Equinox Submodels:
- LS, LT | 6 Cyl 3.4 L GAS

2005 Chevrolet Equinox Door Handle

With a comprehensive array of OEM 2005 Chevrolet Equinox Door Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Equinox Door Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Equinox Parts Questions & Experts Answers

Q: How to replace the front interior door handle on 2005 Chevrolet Equinox?
A: You will start replacing a front door interior handle by taking out the screw located at the center of the pocket on the inside handle. You should slide the handle forward to reveal the lock rods before pulling it outward. Remove the rods from their retaining clips through the use of a thin-bladed tool. The power window installation requires you to disconnect the electrical connector from the switch by pressing on the retaining tabs. The installation requires you to connect the electrical connector to the Power Window Switch followed by fitting the inside handle into the door trim and narrowly seating the rear tangs. Use your hand to lift the lock rods into position in the retaining clips before attaching the clips on top of the rods. Press the handle into position while moving it towards the rear side of the trim panel to let tangs engage properly while rods remain above the water deflector. Insert the screw into the handle before tightening it to 2.5 n.m (22 lb in). The correct installation of lock rods can be verified by checking for proper movement of the lock button combined with a smooth operation of the inside handle.