Make sure this part fits

GM 22672194
Handle, Outside, Black

2004-2010 GM

Customer Questions & Expert Answers (9)
GM 22672194 Handle, Outside, Black
  • Part Description
    Handle, Door Outside Handle; Exterior Door Handle
  • Position
    Front and Rear
  • Manufacturer
    General Motors
Make sure this part fits
$30.89 MSRP: $48.34
You Save: $17.45 (37%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22672194
    Part DescriptionHandle, Door Outside Handle; Exterior Door Handle
    Other NamesLever, Door Outside Handle
    Item Dimensions8.2 x 3.3 x 3.2 inches
    Item Weight0.50 Pounds
    PositionFront and Rear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22672194
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Chevrolet EquinoxLS, LT, Sport6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
    2004-2008 Chevrolet MalibuBase, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2010 Pontiac G6Base, GT, GTP, GXP4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
    2006-2009 Pontiac TorrentBase, GXP6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22672194 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22672194 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear inside door handle on Chevrolet Malibu? Posted by Customer
    A:
    The first step for installing a new rear inside door handle involves taking away both the rear door trim panel and the rear door water deflector. You can separate the rear door inside handle from its rivet point by first driving the rear door inside handle mounting rivet mandrel into the rivet head using a center punch then drilling the rivet out with a 6.35 mm (1/4 in) drill bit. The sliding mounting feet allow removal of the door handle from the door inner panel when pushed forward and enable hood removal of the rear door inner door handle. After detaching the front part of the handle rod from the inside door handle of the rear door proceed with removal. To install the handle rod first attach it to the rear door inner door handle then insert the slots into the inner door panel while moving the mounting feet toward the back of the panel. Secure the rear door inner door handle by installing the rivet followed by reinstallation of the rear door water deflector and rear door trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Equinox? Posted by Customer
    A:
    Connect the electrical connector to the power window switch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2006 Chevrolet Equinox? Posted by Customer
    A:
    If a gasket is needed, install it first.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step to replace the rear outside door handle for the 2005 Chevrolet Equinox? Posted by Customer
    A:
    Remove the door handle bolt cap.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What should you do to remove the front door inside handle rod from the door lock for the 2004 Chevrolet Malibu? Posted by Customer
    A:
    Unclip the handle rod retainer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    How do you detach the outside handle from the door for the 2006 Chevrolet Malibu? Posted by Customer
    A:
    Pull the outside handle rearward to detach it from the door, followed by removing the gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2005 Chevrolet Malibu? Posted by Customer
    A:
    Attach the handle rod to the rear door inner door handle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Malibu? Posted by Customer
    A:
    Attach the door handle rod to the housing and then connect the handle rod to the lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Handle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22672194, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22672194 Handle, Outside, Black. It is sometimes referred to as GM Door Handle. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22672194 Handle, Outside, Black. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery