How to replace the Ignition Control Module on 2005 Chevrolet Silverado 1500?

Start by taking out the air cleaner outlet resonator and disconnect the ignition coil driver electrical connector. Start by unscrewing the ignition control module screws then remove the ignition control module together with the heat sink . IENTATION REQUIREMENTS ARE FOUND IN THE FASTENER NOTICE OF SERVICE PRECAUTIONS while installing the ignition control module and heat sink . Tighten the ignition control module screws to a torque of 3.5 N.m (31 lb in). Disengage the ignition coil driver electrical connector before repositioning the air cleaner outlet resonator.

OEM 2005 Chevrolet Silverado 1500 Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Control Module found

View related parts
2005 Chevrolet Silverado 1500 Control Module
Part Number: 10482803
$150.56 MSRP: $270.06
You Save: $119.50 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; ESC Control Module; Coil Module; Module
- Replaced by: 19435467
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 2.2 x 1.8 inches
- Condition: New
- SKU: 10482803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Silverado 1500 Submodels:
- Base, LS, LT, WT | 6 Cyl 4.3 L GAS

2005 Chevrolet Silverado 1500 Ignition Control Module

With a comprehensive array of OEM 2005 Chevrolet Silverado 1500 Ignition Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Silverado 1500 Ignition Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Silverado 1500 Ignition Control Module Parts Questions & Experts Answers

Q: How to replace the Ignition Control Module on 2005 Chevrolet Silverado 1500?
A: Start by taking out the air cleaner outlet resonator and disconnect the ignition coil driver electrical connector. Start by unscrewing the ignition control module screws then remove the ignition control module together with the heat sink . IENTATION REQUIREMENTS ARE FOUND IN THE FASTENER NOTICE OF SERVICE PRECAUTIONS while installing the ignition control module and heat sink . Tighten the ignition control module screws to a torque of 3.5 N.m (31 lb in). Disengage the ignition coil driver electrical connector before repositioning the air cleaner outlet resonator.