How to replace the Brake Fluid Level Sensor in the Master Cylinder on 2005 Chevrolet Uplander?

To change the Master Cylinder Fluid Level Sensor, unscrew the electrical connector and take out the sensor with a needle nose plier to squeeze the locking tabs. To install it, place the sensor until the tabs clip in, and reconnect the electrical connector.

OEM 2005 Chevrolet Uplander Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2005 Chevrolet Uplander Level Sensor Part Number: 18012741
$13.39 MSRP: $25.15
You Save: $11.76 (47%)
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2005 Chevrolet Uplander Brake Fluid Level Sensor

With a comprehensive array of OEM 2005 Chevrolet Uplander Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Uplander Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Uplander Brake Fluid Level Sensor Parts and Q&A

Q: How to replace the Brake Fluid Level Sensor in the Master Cylinder on 2005 Chevrolet Uplander?
A: To change the Master Cylinder Fluid Level Sensor, unscrew the electrical connector and take out the sensor with a needle nose plier to squeeze the locking tabs. To install it, place the sensor until the tabs clip in, and reconnect the electrical connector.