How to replace the exhaust crossover exhaust pipe on 2005 Chevrolet Uplander?

The first step for crossover Exhaust Pipe replacement requires disconnecting the negative Battery Cable followed by removing the throttle body air inlet duct then draining the cooling system coolant. Start by taking off the inlet Radiator Hose from the engine and following it with the thermostat bypass pipe and the exhaust crossover heat shield bolts to disassemble the heat shield. Once finished disconnect the exhaust crossover pipe studs and nuts as well as the complete exhaust crossover pipe. The first step of installation requires you to install the exhaust crossover pipe while also attaching exhaust crossover pipe studs/nuts and tightening them to 25 nm (18 ft. Lbs.). The exhaust crossover heat shield bolts need to be installed next while applying torque of 10 nm (89 inch lbs.). After this install the thermostat bypass pipe followed by the inlet Radiator Hose to the engine while filling the cooling system with engine coolant before reattaching the throttle body air inlet duct then reconnecting the battery ground (negative) cable.

OEM 2005 Chevrolet Uplander Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Pipes found

View related parts
2005 Chevrolet Uplander Cross Over Part Number: 24507946
$102.54 MSRP: $138.79
You Save: $36.25 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Exhaust Pipe; Crossover Pipe; Front Pipe; Cross Over Pipe; Exhaust Pipe
- Replaces: 24503680
- Item Weight: 4.40 Pounds
- Item Dimensions: 24.5 x 6.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24507946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS
View related parts
2005 Chevrolet Uplander Muffler & Pipe Part Number: 15839174
Product Specifications
- Other Name: Muffler, Exhaust; Exhaust Pipe; Muffler
- Replaces: 15131308
- Item Weight: 37.10 Pounds
- Item Dimensions: 102.0 x 17.2 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15839174
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2005 Chevrolet Uplander Muffler & Pipe Part Number: 15249044
Product Specifications
- Other Name: Muffler, Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Item Weight: 40.60 Pounds
- Item Dimensions: 102.0 x 17.9 x 13.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15249044
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2005 Chevrolet Uplander Exhaust Pipe

With a comprehensive array of OEM 2005 Chevrolet Uplander Exhaust Pipe, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Uplander Exhaust Pipe are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Uplander Exhaust Pipe Parts and Q&A

Q: How to replace the exhaust crossover exhaust pipe on 2005 Chevrolet Uplander?
A: The first step for crossover Exhaust Pipe replacement requires disconnecting the negative Battery Cable followed by removing the throttle body air inlet duct then draining the cooling system coolant. Start by taking off the inlet Radiator Hose from the engine and following it with the thermostat bypass pipe and the exhaust crossover heat shield bolts to disassemble the heat shield. Once finished disconnect the exhaust crossover pipe studs and nuts as well as the complete exhaust crossover pipe. The first step of installation requires you to install the exhaust crossover pipe while also attaching exhaust crossover pipe studs/nuts and tightening them to 25 nm (18 ft. Lbs.). The exhaust crossover heat shield bolts need to be installed next while applying torque of 10 nm (89 inch lbs.). After this install the thermostat bypass pipe followed by the inlet Radiator Hose to the engine while filling the cooling system with engine coolant before reattaching the throttle body air inlet duct then reconnecting the battery ground (negative) cable.