OEM 2005 Chevrolet Uplander Washer Reservoir

2005 Chevrolet Uplander Parts Questions & Experts Answers

• Q: How to replace the windshield washer reservoir on 2005 Chevrolet Uplander?

  A: The first step is to move the underhood electrical center and take out the right front diagonal brace. Remove the Washer Pump electrical connectors plus washer hose connections at both front and rear pumps then place the captured washer solvent into an appropriate receptacle. Drill the 2 engine wiring harness pins and undo bolts from both fender flange and wheelhouse inner wall. Ease the washer container down the engine area by moving the engine wiring harness across its top and then unscrew the washer solvent container. Change from both front and rear washer units to this storage area. New washer grommets needs to be installed in the pump holder before you put back the washer cap, front Washer Pump, and rear Washer Pump if there. Guide the engine harness towards the front as you place the washer container inside the engine area with the electrical cables resting on top of the washer spout. Set the washer container on the right front inner fender section and load the bolts while tightening them at 6 n.m in 53 lb in steps. Follow these steps to put back the washer jumper lines and electrical parts while setting the right front diagonal brace and moving the underhood electrical center. Fill the washer tank with fresh solvent and check if wiper and washer functions work correctly.