OEM 2005 Chevrolet Venture Brake Booster

2005 Chevrolet Venture Brake Booster Parts Questions & Experts Answers

• Q: How to replace the vacuum brake booster on 2005 Chevrolet Venture?

  A: You should begin the vacuum Brake Booster replacement process by draining the fuel line pressure and cooling system contents. Take out the Coolant Reservoir plus two components to gain access behind the air cleaner housing. Store the pcm aside without touching its electrical connector before taking off the air cleaner and duct. Move the heater hose on the coolant crossover pipe for safe access to the brake lines as you disconnect the fuel and vapor lines from their pipes. Disconnect the Brake Master Cylinder to take out the fluid level sensor switch. Later detach the brake lines and master cylinder at their ends. Unfasten the wall hose from its vacuum check valve attachment point and relocate it before taking away both the abs control unit and its retaining bracket. Unbolt the knee bolster before removing the booster push pin retaining clip and washer at the pedal assembly and the booster push rod. Move forward the engine by taking apart the two engine mounts and Brake Booster mounting nuts to reveal the Brake Booster for removal. Set the Brake Booster in its cowl and plate brackets and fasten it with Brake Booster mounting nuts to 25 nm torque (18 ft. Lbs. Torque). Place the master cylinder at its position and join the Brake Booster push rod to the Brake Pedal using the washer and retaining clip. Turn the stop lamp switch to avoid brake drag and lower maintenance needs before reinstalling the knee bolster. Reposition the engine and assemble engine mounts before attaching the vacuum hose to its check valve. Put back the abs parts then attach brake hoses to the master cylinder and reconnect the fluid level monitor switch. Put back the fuel lines, heater crossover parts, air cleaner pieces, pcm, and cover of the pcm. Reposition the left front cross brace before filling and bleeding the cooling system and brake system.