How to replace the coolant reservoir on 2005 Chevrolet Venture?

Start by using Hose Clamp Pliers (J 38185) to move the reservoir hose clamp to the radiator overflow fitting before removing the reservoir hose from this point. Loosen the mounting clip which adheres to the reservoir before removing the actual coolant reservoir. Start installation by putting the new coolant reservoir into place and fastening it with its mounting clip. Rejoin the reservoir hose to the radiator overflow fitting and use Hose Clamp Pliers (J 38185) to tighten the hose clamp until the hose stays in position. After completing the process fill the coolant reservoir.

OEM 2005 Chevrolet Venture Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2005 Chevrolet Venture Reservoir
Part Number: 15250668
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
- Replaces: 10311259, 10295298
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.2 x 12.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15250668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2005 Chevrolet Venture Coolant Reservoir

With a comprehensive array of OEM 2005 Chevrolet Venture Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Venture Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Venture Coolant Reservoir Parts Questions & Experts Answers

Q: How to replace the coolant reservoir on 2005 Chevrolet Venture?
A: Start by using Hose Clamp Pliers (J 38185) to move the reservoir hose clamp to the radiator overflow fitting before removing the reservoir hose from this point. Loosen the mounting clip which adheres to the reservoir before removing the actual coolant reservoir. Start installation by putting the new coolant reservoir into place and fastening it with its mounting clip. Rejoin the reservoir hose to the radiator overflow fitting and use Hose Clamp Pliers (J 38185) to tighten the hose clamp until the hose stays in position. After completing the process fill the coolant reservoir.