Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2005 GMC Savana 3500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

  • 2005 GMC Savana 3500 Crankshaft Position Sensor - 12560228
    2005 GMC Savana 3500 Crankshaft Position Sensor Diagram - 12560228
    View related parts

    2005 GMC Savana 3500 Crankshaft Position Sensor

    Part Number: 12560228
    $65.79 MSRP: $117.48
    You Save: $51.69 (44%)
    Product Specifications
    • Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
    • Replaces: 12555566
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 3.4 x 2.9 x 1.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12560228
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2005 GMC Savana 3500 Submodels:
    • Base, LS, LT, SLE | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS

2005 GMC Savana 3500 Crankshaft Position Sensor

With a comprehensive array of OEM 2005 GMC Savana 3500 Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Savana 3500 Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Savana 3500 Parts Questions & Experts Answers

  • Q: How to replace the Crankshaft Position Sensor on 2005 GMC Savana 3500?
    A: To change the crankshaft position (CKP) sensor, it is important to first put the ignition key in off or lock and make sure that all electrical loads are switched off. Also disconnect the negative Battery Cable to avoid causing personal injury or damaging your vehicle. Start with lifting the vehicle and remove the Starter. Unplug the ckp sensor electrical connector and clean the ckp sensor surroundings in order not to let debris get into the engine. Remove ckp sensor retaining fastener then later the ckp sensor itself. For the installation, insert the ckp sensor into its location and fasten it with a retaining fastener, tightened to 25 n.m (18 lb ft). Connect the ckp sensor's electrical connector, replace the Starter, lower the vehicle, and reconnect the negative Battery Cable. Lastly, execute the ckp system variation learn procedure.

Related 2005 GMC Savana 3500 Parts

Alternate Year Models

+
2004 GMC Savana 3500 Crankshaft Position Sensor 2006 GMC Savana 3500 Crankshaft Position Sensor