How to replace the fuel pressure sensor on 2006 Buick Lucerne?

You must begin by removing the rear compartment liner followed by removing the cover bolts of the fuel sender access hole then detaching the cover itself. Remove the sensor by disconnecting its wiring harness electrical connector from the fuel tank pressure sensor. Install the new fuel tank pressure sensor after correctly positioning it then you should reconnect the fuel level sensor wiring harness electrical connector. Install the fuel sender access hole cover while securing it with bolts until they reach a torque of 2 N.m (18 lb in) based on the Fastener Notice. The last step is reinstalling the rear compartment liner.

OEM 2006 Buick Lucerne Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2006 Buick Lucerne Fuel Pressure Regulator, Passenger Side
Part Number: 16238399
$49.19 MSRP: $101.06
You Save: $51.87 (52%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Fuel Tank Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Pressure Regulator; Sensor, Early Fuel Evaporation; Fuel Gauge Sending Unit; Tank Pressure Sensor
- Position: Passenger Side
- Replaces: 12206740, 16217059, 16257276, 22678829, 09377680, 12219388, 16196060, 9377680
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16238399
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXS, Super | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS

2006 Buick Lucerne Fuel Pressure Sensor

With a comprehensive array of OEM 2006 Buick Lucerne Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Lucerne Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Lucerne Fuel Pressure Sensor Parts Questions & Experts Answers

Q: How to replace the fuel pressure sensor on 2006 Buick Lucerne?
A: You must begin by removing the rear compartment liner followed by removing the cover bolts of the fuel sender access hole then detaching the cover itself. Remove the sensor by disconnecting its wiring harness electrical connector from the fuel tank pressure sensor. Install the new fuel tank pressure sensor after correctly positioning it then you should reconnect the fuel level sensor wiring harness electrical connector. Install the fuel sender access hole cover while securing it with bolts until they reach a torque of 2 N.m (18 lb in) based on the Fastener Notice. The last step is reinstalling the rear compartment liner.