Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2006 Buick Lucerne Rack and Pinion Boot

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

  • 2006 Buick Lucerne Rack and Pinion Boot - 21011025
    2006 Buick Lucerne Rack and Pinion Boot Diagram - 21011025
    View related parts

    2006 Buick Lucerne Tie Rod Boot

    Part Number: 21011025
    Product Specifications
    • Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 12.0 x 4.3 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 21011025
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2006 Buick Lucerne Submodels:
    • CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2006 Buick Lucerne Rack and Pinion Boot

With a comprehensive array of OEM 2006 Buick Lucerne Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Lucerne Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Lucerne Parts Questions & Experts Answers

  • Q: How to Replace a Rack and Pinion Boot on 2006 Buick Lucerne?
    A: Start with Rack and Pinion Boot replacement by properly lifting the vehicle while providing suitable support. Start by taking off the tire and wheel and then dealing with the outer tie rod. First detach the hex jam nut on the inner tie rod and then detach the Tie Rod End clamp from the Rack and Pinion Boot. First loose the Rack and Pinion Boot clamp from the boot housing then disconnect the boot from the steering gear system. Build a new Rack and Pinion Boot connection to the steering gear then use a new Rack and Pinion Boot clamp to complete the installation. To secure the Rack and Pinion Boot clamp use j 22610 keystone clamp plier (J 22610). Wire the Tie Rod End clamp onto the Rack and Pinion Boot while installing the hex jam nut on the inner tie rod assembly and the outer tie rod subsequently. Complete the installation by lowering the vehicle then performing toe alignment adjustments.

Related 2006 Buick Lucerne Parts

Alternate Year Models

+
2007 Buick Lucerne Rack and Pinion Boot