How to replace the Radius Heat Shield for the power steering gear on 2006 Buick Lucerne?

In order to remove the position of power steering gear heat shield, it is important to raise and support the vehicle. Stabilizer shaft links should be removed and the shaft should be rotated down. Unscrew the retaining bolts by removing the plastic clip. Install a new heat shield, reconnect the clip, and reconnect the links of the stabilizer shaft and lower it.

OEM 2006 Buick Lucerne Radius Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radius Heat Shield found

View related parts
2006 Buick Lucerne Heat Shield Part Number: 15824853
Product Specifications
- Other Name: Shield-Steering Gear Heat; Radius Heat Shield; Shield, Steering Gear Mounting
- Item Weight: 0.30 Pounds
- Item Dimensions: 17.9 x 9.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15824853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2006 Buick Lucerne Radius Heat Shield

With a comprehensive array of OEM 2006 Buick Lucerne Radius Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Lucerne Radius Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Buick Lucerne Radius Heat Shield Parts and Q&A

Q: How to replace the Radius Heat Shield for the power steering gear on 2006 Buick Lucerne?
A: In order to remove the position of power steering gear heat shield, it is important to raise and support the vehicle. Stabilizer shaft links should be removed and the shaft should be rotated down. Unscrew the retaining bolts by removing the plastic clip. Install a new heat shield, reconnect the clip, and reconnect the links of the stabilizer shaft and lower it.