How to replace the Radius Heat Shield on Buick Lucerne?

In order to remove the steering gear heat shield, first, raise and support the vehicle. Disconnect the stabilizer shaft links, and then turn the stabilizer shaft down. Now, pull out the plastic clip on the power steering gear heat shield, then the retaining bolts and remove the heat shield as well. For installation, also install new power steering gear heat shield in place and make sure to refer to the fastener notice. Support the assembly by the cut out and install he retaining bolts and tighten the bolts to 9 n.m (80 lb in). Reconnect the plastic clip to the heat shield and reinstall the stabilizer shaft links before lowering the vehicle.

OEM Buick Lucerne Radius Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radius Heat Shield found

View related parts
Buick Lucerne Heat Shield
Part Number: 15824853
Product Specifications
- Other Name: Shield-Steering Gear Heat; Radius Heat Shield; Shield, Steering Gear Mounting
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

Buick Lucerne Radius Heat Shield

Our website offers an extensive catalog of genuine Buick Lucerne Radius Heat Shield at unbeatable prices. Every OEM Buick Lucerne Radius Heat Shield comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Lucerne Radius Heat Shield Parts Questions & Experts Answers

Heat Shield
15824853
Q: How to replace the Radius Heat Shield on Buick Lucerne?
A: In order to remove the steering gear heat shield, first, raise and support the vehicle. Disconnect the stabilizer shaft links, and then turn the stabilizer shaft down. Now, pull out the plastic clip on the power steering gear heat shield, then the retaining bolts and remove the heat shield as well. For installation, also install new power steering gear heat shield in place and make sure to refer to the fastener notice. Support the assembly by the cut out and install he retaining bolts and tighten the bolts to 9 n.m (80 lb in). Reconnect the plastic clip to the heat shield and reinstall the stabilizer shaft links before lowering the vehicle.