How to replace the Radius Heat Shield on 2009 Buick Lucerne?

A mechanic should lift and stabilize the vehicle before starting a replacement on the steering gear heat shield. Surface the stabilizer shaft links and drive the stabilizer shaft into its lowest possible position. The first step removes the plastic clip attached to the power steering gear heat shield followed by disassembling both retaining bolts and the heat shield itself. Position the new power steering gear heat shield in place then fasten its retaining bolts while tightening them to 9 nm torque (80 lb in) specification. Reinstall the vehicle after you reconnect the plastic clip to the heat shield and put back the stabilizer shaft links.

OEM 2009 Buick Lucerne Radius Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Radius Heat Shield found

View related parts
2009 Buick Lucerne Heat Shield
Part Number: 15824853
Product Specifications
- Other Name: Shield-Steering Gear Heat; Radius Heat Shield; Shield, Steering Gear Mounting
- Item Weight: 0.30 Pounds
- Item Dimensions: 17.9 x 9.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15824853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2009 Buick Lucerne Radius Heat Shield

With a comprehensive array of OEM 2009 Buick Lucerne Radius Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Buick Lucerne Radius Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Buick Lucerne Parts Questions & Experts Answers

Q: How to replace the Radius Heat Shield on 2009 Buick Lucerne?
A: A mechanic should lift and stabilize the vehicle before starting a replacement on the steering gear heat shield. Surface the stabilizer shaft links and drive the stabilizer shaft into its lowest possible position. The first step removes the plastic clip attached to the power steering gear heat shield followed by disassembling both retaining bolts and the heat shield itself. Position the new power steering gear heat shield in place then fasten its retaining bolts while tightening them to 9 nm torque (80 lb in) specification. Reinstall the vehicle after you reconnect the plastic clip to the heat shield and put back the stabilizer shaft links.