To replace the Steering Wheel, the sir system must first to be disabled. Take away the inflatable restraint Steering Wheel module and detach the steering electrical connector. If present, take off the weight block from the Steering Wheel base and then remove the Steering Wheel retaining nut while recording the alignment mark on
Steering Shaft and Steering Wheel for reinstallation purposes. Apply the Steering Wheel puller legs (J 42578) and Steering Wheel puller (J 1859-A) to loosen off the Steering Wheel from the
Steering Column and remove it. For installation, guide the wiring past the Steering Wheel, match its marks, and install the Steering Wheel. Tighten the Steering Wheel retainer nut to 41 nm30 ft. Lbs, then the weight block on if equipt and install the inflatable restraint Steering Wheel module before activating the sir system.