How to replace the intermediate steering shaft on Buick Lucerne?

You must start by removing both the Steering Column and its intermediate shaft then separate the intermediate Steering Shaft boot before proceeding. Starting with the intermediate shaft pinch bolt removal at the Steering Column allows you to remove the intermediate Steering Shaft. Follow the fastener notice in service precautions when attaching the intermediate Steering Shaft to the Steering Column during installation. Simultaneously install the pinch bolt onto the power steering gear stub shaft until torque reaches 47 n.m (35 lb ft). Place the intermediate steering boot back in position and fasten the intermediate shaft as well as Steering Column into place.

OEM Buick Lucerne Steering Shaft

Steering Stem Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Shaft found

View related parts
Buick Lucerne Intermediate Shaft
Part Number: 25810450
Product Specifications
- Other Name: Shaft Assembly, Intermediate Steering; Steering Shaft; Lower Shaft; Intermed Shaft; Shaft, Steering Column Intermediate; Shaft, Steering Column
- Replaces: 26056868, 26068295, 26073020, 10367811, 26100571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Buick Lucerne | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

Buick Lucerne Steering Shaft

Our website offers an extensive catalog of genuine Buick Lucerne Steering Shaft at unbeatable prices. Every OEM Buick Lucerne Steering Shaft comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Lucerne Steering Shaft Parts Questions & Experts Answers

Intermediate Shaft
25810450
Q: How to replace the intermediate steering shaft on Buick Lucerne?
A: You must start by removing both the Steering Column and its intermediate shaft then separate the intermediate Steering Shaft boot before proceeding. Starting with the intermediate shaft pinch bolt removal at the Steering Column allows you to remove the intermediate Steering Shaft. Follow the fastener notice in service precautions when attaching the intermediate Steering Shaft to the Steering Column during installation. Simultaneously install the pinch bolt onto the power steering gear stub shaft until torque reaches 47 n.m (35 lb ft). Place the intermediate steering boot back in position and fasten the intermediate shaft as well as Steering Column into place.