ChevyParts
My Garage
My Account
Cart
OEM 2006 Buick Rainier Ball Joint
Control Arm Joint- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ball Joints found
2006 Buick Rainier Lower Ball Joint, Front Part Number: 19133670
$57.43 MSRP: $140.12You Save: $82.69 (60%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 22157319
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.9 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Buick Rainier Upper Ball Joint, Front Part Number: 19133638
$60.06 MSRP: $146.59You Save: $86.53 (60%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints; Stud, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaces: 22157320
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.0 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19133638
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2006 Buick Rainier Ball Joint
With a comprehensive array of OEM 2006 Buick Rainier Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Buick Rainier Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2006 Buick Rainier Ball Joint Parts Questions & Experts Answers
- Q: How to replace the lower ball joint on 2006 Buick Rainier?A: Start replacement of the lower Ball Joint by lifting the car above ground and taking off the tire wheel assembly. First remove the Steering Knuckle which holds the Wheel Hub bearing assembly. Next strike the lower Ball Joint flange with a chisel to detach it from the Control Arm. Install new lower Ball Joint components using j34874 booster seal remover/installer and j9519-e Ball Joint remover and installer set. Fit the lower assembly in position then install it using the Ball Joint remover and installer set (J9519-E) along with the Ball Joint installer (J41435) and receiver (J45105-2). Open the lower Ball Joint by adding the Ball Joint flaring adapter (J45105-1). Install the Ball Joint install adapter j45105-1 onto the lower Ball Joint and create the flare through the flange with the Ball Joint remover and installer set j9519-e. Complete the process by taking out the tools and placing back the Steering Knuckle assembly with Wheel Hub and bearing. Then install tire and wheel before lowering the vehicle to test front wheel alignment.