Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19133638
Upper Ball Joint, Front

2002-2009 GM

Customer Questions & Expert Answers (16)
GM 19133638 Upper Ball Joint, Front
  • Part Description
    Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint
  • Position
    Front Upper
  • Replaces
    22157320
  • Manufacturer
    General Motors
Make sure this part fits
$60.06 MSRP: $146.59
You Save: $86.53 (60%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 19133638 Upper Ball Joint, Front is Ref No. 4 in the diagram below

    2006 Chevy SSR Upper Ball Joint, Front Diagram for 19133638
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19133638

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19133638 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19133638 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the upper ball joint on Buick Rainier? Posted by Customer
    A:
    Before starting work lift the car and put it on stands while removing the tire and wheel. Start by untighting the Steering Knuckle joint that brings together the Wheel Hub and then disconnect both the upper Ball Joint retaining clip and boot. To remove the upper Ball Joint from the Steering Knuckle you need to use the lower Ball Joint remover and installer (J9519-E). The proper installation of the new upper Ball Joint into the Steering Knuckle depends on using the lower Ball Joint remover and installer (J9519-E), control arm bushing set (J21474-01), and Ball Joint installation spacer (J45117). Install the Steering Knuckle with Wheel Hub and replace the tire and wheel. Lower the vehicle and test front wheel alignment at the end.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the upper ball joint on a 4WD on GMC Envoy? Posted by Customer
    A:
    Start your upper Ball Joint replacement work on a 4wd vehicle by lifting up the vehicle before taking out the wheel and tire unit. Set a proper jack stand below the lower Control Arm then unclip the front brake hose from the upper Control Arm. You should disconnect Wheel Speed Sensor brackets after taking off the Wheel Speed Sensor bracket bolt. Separate the upper Control Arm from the ball stud by taking off and eliminating its retaining nuts and then separate and remove the upper Ball Joint nut. Disconnect the Ball Joint from the Steering Knuckle with Ball Joint separator j 6627-a and extract it from the Steering Knuckle. Fit the new Ball Joint onto the Steering Knuckle and secure a new nut using torque of 75 nm (55 ft. Lbs.). Install the upper Control Arm to the ball stud with the retention nuts then tighten them to 47 nm. Reconnect the Wheel Speed Sensor brackets and place the Wheel Speed Sensor bracket bolt before tightening it to 20 nm torque setting. After linking the brake hose to the Control Arm you can put back the tire wheel set and take off the support from under the Control Arm to complete repairs.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after securing the upper ball joint for the 2005 Buick Rainier? Posted by Customer
    A:
    Reattach the steering knuckle with the wheel hub, reinstall the tire and wheel, lower the vehicle, and finally check the front wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step to replace the upper ball joint for the 2007 Buick Rainier? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done after the installation of the lower ball joint for the 2006 Buick Rainier? Posted by Customer
    A:
    Remove the tools and then attach the Ball Joint Flaring Adapter (J45105-1) to the lower ball joint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step to replace the upper ball joint for the 2005 Chevrolet SSR? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    Which tools are used to install the lower ball joint for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Use the J 9519-E (Ball Joint Remover and Installer Set) and J 34874 (Booster Seal Remover/Installer).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the first step to replace the lower control arm ball joint for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    How do you remove the lower ball joint from the lower control arm for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Use the Ball Joint Remover and Installer Set (J9519-E) and the Booster Seal Remover/Installer (J34874) to remove it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What tools are needed for the installation of the new upper ball joint for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Lower Ball Joint Remover and Installer (J9519-E), Control Arm Bushing Set (J21474-01), and Ball Joint Installation Spacer (J45117).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What tool is used to extract the upper ball joint from the steering knuckle for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    The Lower Ball Joint Remover and Installer (J 9519-E).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What are the final steps after installing the new lower ball joint for the 2008 GMC Envoy? Posted by Customer
    A:
    Reattach the steering knuckle with the wheel hub and bearing, install the tire and wheel, lower the vehicle, and finally check the front wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done after removing the tire and wheel for the 2007 GMC Envoy? Posted by Customer
    A:
    Detach the steering knuckle with the wheel hub and bearing attached, and remove the lower ball joint flange using a chisel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What is the process for installing the lower ball joint for the 2003 GMC Envoy? Posted by Customer
    A:
    Position the lower ball joint and use the Ball Joint Remover and Installer Set (J9519-E), Ball Joint Installer (J41435), and Receiver (J45105-2) to secure it to the lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    Q:
    What should be done after securing the upper ball joint for the 2009 GMC Envoy? Posted by Customer
    A:
    Reattach the steering knuckle with the wheel hub, reinstall the tire and wheel, lower the vehicle, and check the front wheel alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ball Joint
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Ball Joint, Front 19133638 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19133638 Upper Ball Joint, Front is available in the market under the name GM Ball Joint. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19133638 Upper Ball Joint, Front fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 19133638 maintains top performance when functioning as the Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint unit at its Front Upper. The component 19133638 is constructed from durable material and its dimensions span 4.0 x 4.0 x 4.1 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Upper Ball Joints; Stud, Steering Knuckle Upper Control Arm. The part 19133638 has available replacement options 22157320. Each vehicle needs 2 units of the part marked as SKU 19133638. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.