ChevyParts
My Garage
My Account
Cart
OEM 2009 GMC Envoy Ball Joint
Control Arm Joint- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ball Joints found
2009 GMC Envoy Lower Ball Joint, Front Part Number: 19133670
$57.43 MSRP: $140.12You Save: $82.69 (60%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 22157319
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.9 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 GMC Envoy Upper Ball Joint, Front Part Number: 19133638
$85.35 MSRP: $146.59You Save: $61.24 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints; Stud, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaces: 22157320
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.0 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19133638
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 GMC Envoy Ball Joint
With a comprehensive array of OEM 2009 GMC Envoy Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Envoy Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 GMC Envoy Ball Joint Parts and Q&A
- Q: How to replace the lower control arm ball joint on 2009 GMC Envoy?A: You need to lift and stabilize the vehicle before working on the lower Control Arm Ball Joint replacement. Lift the vehicle and take off the tire and wheel before disconnecting the Steering Knuckle with Wheel Hub and bearing. You should use a chisel tool to take off the lower Ball Joint flange part. To connect the new lower Ball Joint with the lower Control Arm use both booster seal remover/installer (J 34874) and Ball Joint remover and installer set (J 9519-E). This tool set will help draw out the old lower Ball Joint from the Control Arm safely. Install the new lower Ball Joint within the lower Control Arm using all the tools from the Ball Joint remover and installer set (J 9519-E) as well as the Ball Joint installer (J 41435) and the receiver (J 45105-2). When ready, detach the tools and put on the Ball Joint flaring adapter (J 45105-1) to flare the flange of the lower joint. After putting back the Wheel Hub and bearing, bolt the Steering Knuckle into position and add the tire and wheel afterward. Lower the vehicle to examine the front wheel positioning.
Related 2009 GMC Envoy Parts
2009 GMC Envoy Control Arm
2009 GMC Envoy Sway Bar Link
2009 GMC Envoy Coil Spring Insulator
2009 GMC Envoy Coil Springs
2009 GMC Envoy Control Arm Bracket
2009 GMC Envoy Shock Absorber
2009 GMC Envoy Shock and Strut Boot
2009 GMC Envoy Steering Knuckle
2009 GMC Envoy Sway Bar Bracket
2009 GMC Envoy Sway Bar Bushing
2009 GMC Envoy Sway Bar Kit
2009 GMC Envoy Trailing Arm