ChevyParts
My Garage
My Account
Cart
OEM 2005 Chevrolet Trailblazer Ball Joint
Control Arm Joint- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Ball Joints found
2005 Chevrolet Trailblazer Lower Ball Joint, Front
Part Number: 19133670$56.29 MSRP: $137.37You Save: $81.08 (60%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Ball Joint; Stud, Steering Knuckle Lower Control Arm Pivot
- Position: Front Lower
- Replaces: 22157319
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.9 x 4.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Chevrolet Trailblazer Upper Ball Joint, Front
Part Number: 19133638$58.88 MSRP: $143.71You Save: $84.83 (60%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Stud Kit, Front Upper Control Arm Ball; Suspension Ball Joint; Ball Joint; Upper Ball Joints; Stud, Steering Knuckle Upper Control Arm
- Position: Front Upper
- Replaces: 22157320
- Item Weight: 1.10 Pounds
- Item Dimensions: 4.0 x 4.0 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19133638
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Chevrolet Trailblazer Ball Joint
With a comprehensive array of OEM 2005 Chevrolet Trailblazer Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Trailblazer Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Chevrolet Trailblazer Parts Questions & Experts Answers
- Q: How to replace the lower ball joint on 2005 Chevrolet Trailblazer?A: Start by raising and supporting the vehicle followed by tire and wheel removal for lower Ball Joint replacement. Detach the Steering Knuckle with attached Wheel Hub and bearing followed by using a chisel to remove the lower Ball Joint flange. To remove the lower Ball Joint utilize the Ball Joint remover and installer set (J9519-E) and the booster seal remover/installer (J34874) on the lower Control Arm's Ball Joint. Then use these toolset to separate the Ball Joint from its attachment. Installation of the new lower Ball Joint requires use of j9519-e Ball Joint installer (J41435) alongside receiver (J45105-2) and the Ball Joint installer (J41435) to properly position the component within the lower Control Arm. Position the Ball Joint flaring adapter (J45105-1) to the lower Ball Joint after removing all installation tools. Flare the lower Ball Joint flange using the combination of tools j9519-e and j45105-1 and remove all tools afterward. Reinstallation begins with attaching the Wheel Hub and bearing to the Steering Knuckle before putting on the tire and wheel and lowering the vehicle until an alignment check is performed.
Related 2005 Chevrolet Trailblazer Parts
2005 Chevrolet Trailblazer Control Arm
2005 Chevrolet Trailblazer Air Suspension Compressor
2005 Chevrolet Trailblazer Coil Springs
2005 Chevrolet Trailblazer Control Arm Bracket
2005 Chevrolet Trailblazer Ride Height Sensor
2005 Chevrolet Trailblazer Shock Absorber
2005 Chevrolet Trailblazer Shock and Strut Boot
2005 Chevrolet Trailblazer Suspension Strut Rod
2005 Chevrolet Trailblazer Sway Bar Bracket
2005 Chevrolet Trailblazer Sway Bar Kit
2005 Chevrolet Trailblazer Sway Bar Link
2005 Chevrolet Trailblazer Trailing Arm