How to service and repair a coil springs and shock absorber on 2005 Chevrolet Trailblazer?

Begin the shock absorber servicing process by elevating and supporting the vehicle while removing its tire followed by the wheel. You must start by disconnecting the shock module from its vehicle position before removing its yoke to shock absorber pinch bolt and nut. A flat tool should be used to loosen the pin at the yoke of the shock module before removing it from the absorbing device. The installer should apply heater hose pieces to the shock module spring which will be contacted by the strut spring compressor (J45400) at the lower spring region before putting the shock module into the strut spring compressor (J45400). Continue turning the spring compressor forcing screw while checking to see that the shock absorber offers easy movement. The shock absorber upper retaining nut needs removal so you can pull the shock absorber out of the shock module. Release the compressor forcing screw to separate the upper mounting plate along with coil spring from the j45400 strut spring compressor unit. Begin installation by placing both coil spring and upper mounting plate onto the strut spring compressor (J45400). Then compress the spring with the tool again for further processing. Insert the shock absorber into the shock module then fasten it using the retaining nut at 45 nm torque setting (33 ft. Lbs.). Sever the shock module connection to the strut spring compressor (J45400) so you can remove the heater hose pieces near its spring. Screw the shock module yoke to its position on the shock absorber through the pinch bolt and the nut until achieving 70 nm torque (52 ft. Lbs. Torque). Reinstall the shock module onto the vehicle followed by installation of tire and wheel before lower the car.

OEM 2005 Chevrolet Trailblazer Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Shock Absorbers found

View related parts
2005 Chevrolet Trailblazer Shock Absorber, Front
Part Number: 15098727
$120.98 MSRP: $227.20
You Save: $106.22 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Front Shock; Suspension Strut and Shock Assembly Kit; Air to Coil Spring Conversion; Complete Strut Kit.; Strut
- Position: Front
- Item Weight: 4.00 Pounds
- Item Dimensions: 30.4 x 9.5 x 9.0 inches
- Condition: New
- SKU: 15098727
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Trailblazer Submodels:
- LS, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2005 Chevrolet Trailblazer Shock Absorber, Rear
Part Number: 15881662
$80.32 MSRP: $157.27
You Save: $76.95 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber, Rear Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 15159641, 15058616, 15198311, 15172341, 15193273
- Item Weight: 3.20 Pounds
- Item Dimensions: 4.1 x 4.1 x 29.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15881662
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Trailblazer Submodels:
- LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2005 Chevrolet Trailblazer Shock Absorber
Part Number: 25820699
$145.52 MSRP: $271.54
You Save: $126.02 (47%)
ADD TO CART
Product Specifications
- Other Name: Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 15159645, 15172343, 15206892, 15894447, 15172340, 25865982, 25820694, 15159648, 15172342, 15894449, 15894448, 25820695
- Item Weight: 3.20 Pounds
- Item Dimensions: 28.0 x 4.3 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25820699
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2005 Chevrolet Trailblazer Shock Absorber
Part Number: 15058617
$66.14 MSRP: $123.41
You Save: $57.27 (47%)
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Air to Coil Spring Conversion; Complete Strut Kit.; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 3.20 Pounds
- Item Dimensions: 28.3 x 4.0 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15058617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Trailblazer Submodels:
- LS, LT, North Face | 6 Cyl 4.2 L GAS
View related parts
2005 Chevrolet Trailblazer Shock Absorber, Front
Part Number: 15098725
Product Specifications
- Other Name: Front Shock Absorber Kit; Suspension Assembly; Air Spring to Coil Conversion; Complete Strut Set; Strut; Absorber, Front And Rear Suspension; Shock
- Position: Front
- Replaces: 15063734
- Item Weight: 4.10 Pounds
- Item Dimensions: 22.6 x 6.1 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15098725
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Trailblazer Submodels:
- LS, LT, LTZ, North Face | 6 Cyl 4.2 L GAS
View related parts
2005 Chevrolet Trailblazer Shock Absorber
Part Number: 88965472
Product Specifications
- Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Link; Absorber Kit, Front And Rear Suspension; Shock
- Position: Front
- Item Weight: 3.80 Pounds
- Item Dimensions: 26.3 x 4.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88965472
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Trailblazer Submodels:
- LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2005 Chevrolet Trailblazer Shock Absorber

With a comprehensive array of OEM 2005 Chevrolet Trailblazer Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Trailblazer Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Trailblazer Parts Questions & Experts Answers

Q: How to service and repair a coil springs and shock absorber on 2005 Chevrolet Trailblazer?
A: Begin the shock absorber servicing process by elevating and supporting the vehicle while removing its tire followed by the wheel. You must start by disconnecting the shock module from its vehicle position before removing its yoke to shock absorber pinch bolt and nut. A flat tool should be used to loosen the pin at the yoke of the shock module before removing it from the absorbing device. The installer should apply heater hose pieces to the shock module spring which will be contacted by the strut spring compressor (J45400) at the lower spring region before putting the shock module into the strut spring compressor (J45400). Continue turning the spring compressor forcing screw while checking to see that the shock absorber offers easy movement. The shock absorber upper retaining nut needs removal so you can pull the shock absorber out of the shock module. Release the compressor forcing screw to separate the upper mounting plate along with coil spring from the j45400 strut spring compressor unit. Begin installation by placing both coil spring and upper mounting plate onto the strut spring compressor (J45400). Then compress the spring with the tool again for further processing. Insert the shock absorber into the shock module then fasten it using the retaining nut at 45 nm torque setting (33 ft. Lbs.). Sever the shock module connection to the strut spring compressor (J45400) so you can remove the heater hose pieces near its spring. Screw the shock module yoke to its position on the shock absorber through the pinch bolt and the nut until achieving 70 nm torque (52 ft. Lbs. Torque). Reinstall the shock module onto the vehicle followed by installation of tire and wheel before lower the car.