Make sure this part fits

GM 88965472
Shock Absorber

2002-2007 GM

Customer Questions & Expert Answers (10)
GM 88965472 Shock Absorber
  • Part Description
    Absorber Kit, Front Shock; Suspension Shock Absorber
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number88965472
    Part DescriptionAbsorber Kit, Front Shock; Suspension Shock Absorber
    Other NamesLink; Absorber Kit, Front And Rear Suspension; Shock
    Item Dimensions26.3 x 4.5 x 3.5 inches
    Item Weight3.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU88965472
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2007 Chevrolet TrailblazerLS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2007 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2006 GMC Yukon XL 1500Denali, SL, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 88965472 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88965472 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you avoid doing with gas charged shock absorbers for the 2004 Buick Rainier? Posted by Customer
    A:
    Do not remove the snap ring from inside the top of the tube to avoid the risk of personal injury from the contents being expelled with extreme force.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after removing the upper retaining nuts for the 2007 Buick Rainier? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you remove the shock module for the 2005 Buick Rainier? Posted by Customer
    A:
    After removing the Ball Joint Separator (J 36607) and the retaining nut, take out the shock module from the shock tower and lower control arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after securing the lower mounting bolt for the 2006 Buick Rainier? Posted by Customer
    A:
    Attach the upper mounting bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after lowering for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the shock module yoke to lower control arm retaining nut and tighten it to 110 Nm (81 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be installed on the shock module spring for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Pieces of heater hose should be installed where the Strut Spring Compressor (J45400) contacts the lower part of the spring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after installing the lower mounting bolt for the 2007 GMC Envoy? Posted by Customer
    A:
    Install the upper mounting bolt and tighten the upper mounting nut to 85 N.m (63 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What safety precautions should be taken when working with shock absorbers for the 2006 GMC Envoy? Posted by Customer
    A:
    Wear safety glasses when centerpunching and drilling the shock absorber, and take care not to puncture the shock absorber tube.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done after supporting the rear axle for the 2003 GMC Envoy? Posted by Customer
    A:
    Remove the shock absorber upper mounting bolt and the lower mounting bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 88965472, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 88965472 Shock Absorber. It is sometimes referred to as GM Shock Absorber. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 88965472 Shock Absorber. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery